What the PS-HRK-24 hotel room energy kit is
PS-HRK-24 is a per-room retrofit kit from PresenceSensor for hotel guest rooms. One set contains two 24GHz ceiling mmWave presence sensors (bedroom and bathroom), one door magnetic contact that sits inside the existing lock body and runs off the lock battery, and one room controller that mounts inside the switch box already in the room. The kit switches room power on when the door opens and off only when both sensors agree the room is empty. It works without a cloud platform, a PMS integration or a new network. Kit pricing starts at USD 36 per room at 500+ sets, MOQ is 500 sets, samples ship in 3–5 days, and mass production takes 7–10 days.
What is in one set
| Model |
Component |
Where it goes |
Power |
| PS-SEN-BED-24 ×1 / PS-SEN-BATH-24 ×1 |
24GHz ceiling mmWave presence sensor |
Bedroom ceiling and bathroom ceiling, Ø86 mm cut-out |
DC 5V |
| PS-DC-01 ×1 |
Door magnetic contact, 2 × 4 cm |
Inside the gap in the existing lock body |
Door lock battery |
| PS-RC-01 ×1 |
Room controller |
Inside the existing in-room switch box |
Mains at the switch |
Sensors and controller communicate inside the room. The door contact does not need configuring or pairing at the lock: it reports the door opening, and the controller switches room power as soon as that signal arrives.
| Parameter |
Value |
| Technology |
24GHz wideband mmWave radar, FMCW |
| Motion detection |
Up to 10 m |
| Micro-motion and breathing detection |
Up to 2.5 m |
| Field of view |
120° |
| Switch-on latency |
Door contact reports within about one second |
| Switch-off rule |
Both sensors report empty |
| Configuration |
Occupancy hold time adjustable per property |
The 2.5 m micro-motion range is the number that decides whether a guest sleeping in a queen or king bed keeps the room occupied. Most mmWave presence sensors on the market reach 1.5 m or less, which leaves the far side of the bed uncovered.
Which door locks it fits
PS-DC-01 is a magnetic contact, not a lock or a lock interface. It is 2 × 4 cm and fits into the free space inside the lock body of common electronic hotel locks, including Onity, VingCard and Assa Abloy models, drawing power from the lock's own battery. No drilling, no lock replacement and no communication module inside the lock are required. If the lock body has no free 2 × 4 cm gap, the contact can be fitted at the frame edge instead.
How much does a room cost?
Indicative kit pricing is USD 43 per room below 200 sets, USD 39 per room at 200–500 sets, and USD 36 per room at 500+ sets. One set covers a standard guest room: two ceiling presence sensors, the door contact and the room controller.
The final quotation depends on three details: the door lock model (contact placement), the wiring available at the in-room switch box (controller placement) and the room count. Send those three details and you get a per-room bill of materials with a pilot plan. Standard MOQ is 500 sets; pilot floors below that are quoted at the below-200 tier.
How long does installation take?
Each room needs two ceiling cut-outs (Ø86 mm) for the sensors, the door contact fitted into the lock body, and the controller wired into the switch box. A two-person team typically completes a floor of standard rooms in a day, and the kit is commissioned room by room without a central server.
Frequently asked questions
Does the room need internet access?
No. Sensors, door contact and controller communicate inside the room, and the room switches on and off without any network connection. A property can add a gateway if it wants room status in a building system, but the energy function does not depend on it.
What happens if a guest is asleep when the room goes quiet?
The sensors keep reporting presence. 24GHz mmWave radar detects breathing-level micro-motion to 2.5 m, so a sleeping guest continues to read as present and the room is not switched off.
Will it work with the locks we already have?
In most cases yes. The door contact only needs a 2 × 4 cm gap inside the lock body and takes power from the lock battery; it does not talk to the lock electronics. Send the lock model and we will confirm placement before quoting.
Does it integrate with our PMS?
The kit is deliberately local: it does not require PMS integration to control room power. Housekeeping or front-desk status can be added through an optional gateway, but the energy-saving function runs without one.
What is the minimum order?
500 sets (one set per room) for standard production. Pilot floors below 500 sets are negotiable.
How is it certified for export?
Sensors carry CE, FCC and RoHS documentation, and the manufacturing site is ISO 9001 certified. Certificates are supplied with the shipment.
Related pages