Skip to content
PS-CM-WF Datasheet — 24 GHz Ceiling mmWave Presence Sensor (WiFi)
Datasheet

PS-CM-WF Datasheet — 24 GHz Ceiling mmWave Presence Sensor (WiFi)

PS-CM-WF datasheet: 24 GHz ceiling mmWave presence sensor with 10 m motion, 2.5 m micro-motion, breathing detection, 120° field, DC 5 V, WiFi 2.4 GHz.

Last Updated: 11/7/2026 Open Access
Answer Snapshot

Qualification facts buyers can extract quickly

PS-CM-WF datasheet: 24 GHz ceiling mmWave presence sensor with 10 m motion, 2.5 m micro-motion, breathing detection, 120° field, DC 5 V, WiFi 2.4 GHz.

Last Updated
11/7/2026
Who it is for
Hotel and building automation integrators specifying occupancy sensing, Procurement teams comparing mmWave presence sensors by specification
Use cases
Room presence for HVAC and lighting setback, Meeting room and office occupancy detection
Access mode
Open Access
Certifications
CE, FCC, RoHS, ISO 9001
Served markets
Worldwide
Export context
Supplied with CE FCC RoHS documentation for export projects
Next step
Download the datasheet, then send room count and installation constraints to scope a pilot.
Download Experience Open Access Datasheet

What is inside

  • Full electrical and detection specifications
  • Wiring terminals V+ / V− / GND
  • Dimensions, mounting and installation notes
  • Model selection table
  • Document revision history

How to use this file

PDF. Chinese edition available from the same product page.

What this datasheet covers

PS-CM-WF is the WiFi member of the ceiling-mounted range, intended for retrofit projects where no gateway exists and each room should join the local network directly. It detects motion, micro-motion and — within 2.5 m — breathing-level movement, so a sleeping guest is still classified as present.

The document contains the complete specification table, wiring terminals (V+ red, V− black, GND green), dimensions and mounting notes, model selection table and revision history.

Specification summary

Parameter Value
Detection 24 GHz wideband mmWave radar, FMCW
Motion range 10 m
Micro-motion / static range 2.5 m (breathing-level)
Field of view 120°
Communication WiFi 2.4 GHz (802.11 b/g/n)
Power DC 5 V, standby < 0.5 W
Mounting Flush ceiling, Φ86 mm × 35 mm, IP54
Operating temperature −10 °C to +55 °C

Who it is for

This datasheet is written for integrators retrofitting hotels and apartments where adding a gateway is the obstacle to occupancy control. Because there is no coordinator in the path, commissioning is per room rather than per floor — the practical trade-off for a project that cannot add network infrastructure.

Related Content

Find the right presence sensor for your hotel project

Compare the 3 protocols, check hotel-specific case studies, and download the installation guide

Related products

1
Ceiling-mount mmWave presence sensor with WiFi, white flush housing
ProductCeiling Presence SensorsmmWave Radar Sensor

Ceiling Mount mmWave Human Presence Sensor — WiFi

24GHz wideband mmWave ceiling presence sensor with 10m motion detection, 2.5m micro-motion, and breathing detection. 120° field, DC5V, WiFi 2.4GHz. No gateway required for retrofit hotel and apartment projects.

Why this is next

This page already points to it as the next recommended reference.

Related solutions

3
Hotel Room Occupancy & Motion Sensor Solution
SolutionHospitality

Hotel Room Occupancy & Motion Sensor Solution

mmWave radar presence sensors for hotel room occupancy, housekeeping scheduling, and HVAC energy saving. Detect true occupancy — even when the guest is asleep — with our ceiling-mount hotel room motion sensor.

Why this is next

It supports the same product context: Ceiling Mount mmWave Human Presence Sensor — WiFi.

Hotel Room Energy Management System
SolutionHospitality

Hotel Room Energy Management System

Local guest room power control: two ceiling mmWave presence sensors, a door-lock magnetic contact and a controller inside the existing switch box, all in-room.

Why this is next

It supports the same product context: Ceiling Mount mmWave Human Presence Sensor — WiFi.

Meeting Room Occupancy Sensor
SolutionOffices

Meeting Room Occupancy Sensor

mmWave presence sensors for meeting rooms and offices: lighting and HVAC follow seated occupants that PIR misses, and rooms are released only when truly empty.

Why this is next

It supports the same product context: Ceiling Mount mmWave Human Presence Sensor — WiFi.

Related blog posts

3
Next Step

Use the datasheet to shortlist, then quote

Check detection range, power and mounting against the room first, then send the project details for a specification and price.

  • Download the file and compare the specification against the room type.
  • Check wiring and mounting against the ceiling or wall box you have.
  • Send room count and installation constraints for a priced proposal.
Ready for RFQ

Share your product requirements and get a practical next step

Send your drawings, target quantity, and timeline. Our sales engineering team will respond within 24 business hours with a practical next step, a quote, or a sample plan.

Send a quick inquiry

Tell us what you need — room size, target volume, timeline. We respond within 24 business hours.

A clear brief helps the team reply within one business day with the right catalog, sample route, or quotation next step.